UMT UltimateMTK2 v0.9 - Samsung Security, Infinix MDM and more...

[Salim Khan]

UMTv2 / UMT Pro UltimateMTK2 v0.9 The Ultimate MediaTek Tool





What's New:


Added Preloader Exploit (Beta)
- Vivo MT6789 (Helio G99)
- Tecno MT6983 (Dimensity 9000+)


Added Xiaomi Security Repair (New Method)
- Repair make using this method is permanent
- Bootloader must be unlocked
- You can hardreset your device without any issue after repair
- This method needs NVRAM to be intact, if not, you can write NVRAM backup from same model
- This method works only till MIUI 11 (as per our tests)
- If device hangs after repair, you can format or reset it


Added Oppo Security Repair (New Method)
- Bootloader must be unlocked
- We recommend using this method
- This method needs NVRAM to be intact, if not, you can write NVRAM backup from same model
- If device hangs after repair, you can format or reset it


Added Samsung Security Repair
- No need bootloader unlock
- Repair made using this method is permanent
- Should work on all Samsung 4G devices


Added Generic Security Repair
- No need bootloader unlock.
- Repair made using this method is permanent.
- Should work on all Generic 4G devices including Infinix/Tecno etc.


Added Infinix MDM Reset Function
- Account/ID/MDM related functions are moved in a single group.


Added User Agreement at startup
- You must agree to be able to use IMEI/Security related functions


Updated Samsung KG Remove Function


Updated Helio Protocol to eliminate GET_PACKET_LENGTH error


Improved overall Read/Write speed


Fixed Calculation Error while unlocking Bootloader


Fixed rare RPMB Read/Write Error


Fixed DA Error in Infinix 2023 function
- However, we recommend using PL Exploit instead of this


Fixed issue where CUST_PL was selected but DA was not selected by user.


Fixed issue on model selection


Added Update Information in log window on startup

Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
- You can test PRELOADER EXPLOIT on any device with DA from Vendor even if that DA does not allow Write or Erase.

UMT UltimateMTK2 v0.9 Setup Download